The Foam Cannon

Description:
The Foam Cannon is a hand pumped foam slinging machine. This eliminates the need and extra cost of the traditional foam canon. Our Foam Cannon is a must have. Designed with ease of use in mind, throw our cannon in your trunk and use it wherever you need.

✅Half Gallon capacity 

✅Ease of use

✅Portable

1. Preparation:
   Before using the Status Auto Care Handheld Foam Sprayer, ensure the sprayer is clean and free from any residues. Rinse it thoroughly with water to remove any dirt or debris.
2. Soap Solution Preparation:
   Mix your preferred car shampoo or soap with water according to the manufacturer's recommended dilution ratio. Pour the soap solution into the reservoir of the foam sprayer.
3. Fill Level:
   Fill the reservoir of the foam sprayer with the soap solution, leaving some space at the top to allow for proper mixing and foaming action. Avoid overfilling to prevent spills during operation.
4. Secure Attachments:
   Ensure all attachments, including the nozzle and wand, are securely attached to the foam sprayer. Tighten any connections to prevent leaks during pumping.
5. Pumping Action:
   Hold the foam sprayer securely with one hand and use the other hand to pump the handle several times to pressurize the sprayer. Pump until you feel resistance in the handle.
6. Adjust Settings:
   Depending on the model of the foam sprayer, adjust any settings for spray pattern and foam density according to your preferences and the requirements of the cleaning task.
7. Foaming Action:
   Point the nozzle of the foam sprayer towards the surface to be cleaned. Depress the trigger to release the foaming soap solution onto the surface.
8. Even Coverage:
   Move the foam sprayer in a sweeping motion, covering the entire surface with a layer of foam. Ensure even coverage to maximize cleaning effectiveness and avoid missing any areas.
9. Dwell Time:
   Allow the foam to dwell on the surface for a few minutes to loosen dirt, grime, and contaminants. Do not allow the foam to dry on the surface.
10. Rinse Off:
    After the dwell time, rinse the foam off the surface using a steady stream of water from a hose or pressure washer. Start from the top and work your way down to prevent streaking.
11. Repeat if Necessary:
    For heavily soiled areas or stubborn contaminants, repeat the foaming and rinsing process as needed until the desired level of cleanliness is achieved.
12. Cleaning and Storage:
    After each use, thoroughly clean the foam sprayer with water to remove any soap residue. Release any remaining pressure in the sprayer before storing it in a cool, dry place away from direct sunlight.
13. Safety Precautions:

By following these safe directions, you can effectively use the Status Auto Care Handheld Foam Sprayer to apply foaming soap solution for cleaning your vehicle or other surfaces. For any additional questions or concerns, please contact us